iMAC - Step 2
Click on
Yes to continue.
iMAC - Step 3
Click the right arrow to
continue.
iMAC - Step 4
You will need to enter in a name for this
configuration. Also ensure that modem is checked
before continuing.
Enter in the name as shown above, and click the right
arrow to
continue.
iMAC - Step 5
Select the modem you are using from the drop
down list above. Ensure you have the correct port
selected and tone is selected and then click on
the right arrow to
continue.
iMAC - Step 6
Enter in your Local Call Access number, your
username and your password in the spaces
provided ( as shown above ). Once you have done this,
click on the right arrow to
continue.
iMAC - Step 7
Ensure that No is checked and click on the
right arrow to
continue.
iMAC - Step 8
There is no IP Configuration so ensure No
is selected and click on the right arrow to
continue.
iMAC - Step 9
Enter in the DNS addresses as shown above, as
well as the Domain Name as shown above and then
click the right arrow to
continue.
iMAC - Step 10
Enter in your email address and your
password in the spaces provided ( as shown above )
and click on the right arrow to
continue.
iMAC - Step 11
Enter in the POP as shown above and ensure you
replace your-username with your username (
For example, if my name was Bill Smith and my username
was bsmith my POP would be bsmith@pop.lanzing.net
) and you will also need to enter in the SMTP of
which details are shown in the above graphic.
Once you have done this, click on the right arrow to
continue.
iMAC - Step 12
Enter in the News address in the space
provided ( as shown above ) and click on the right arrow
to
continue.
iMAC - Step 13
You have now finished configuring your iMAC for
connection to the internet. To complete your Internet
Settings, click Go Ahead. To connect later, you
can either use the Remote Access section of the Control
Strip, or you can use the Remote Access Control Panel.
Setup
Walkthrough
